Відео

Problem of SolidWorks is that you can't control those points on 3 axis directly on surface like Alias does.

Can we have more tutorial like this

great video, still relevant, cheers

You are a star; best in biz!

Love your detailed and complete explanations!

These are so helpful i wonder why these are not viral within industrial design and engineering community both

i just got through every single video of this channel start to finish and it was an amazing trip

after 7 year and it still such a hell of tutorial series

that was the boss level of fillets 😁

Huge thank you for these series.

what is a lifter?

Here's my summary of this video: 1. Using a "patch" layout before surfacing a complex geometry. 2. Reference surface = a straight surface extrude of the profile. Good practice for initiating the surfacing. 3. Boundary surface vs. Surface Fill & Trim: a.) 4x sided surface should be created with "boundary surface" command. b.) 2,3,5 sided surface should be created with "surface fill" and "trim back" 4. Surface to surface joint relations: a.) Contact relation = abrupt radius change b.) Tangent relation = equal angle, but abrupt radius change c.) Curvature relation = equal radius at junction = smooth transition

Amaze..

Wow you answered my question in the first example using delete n fill. Would've never thought of that on my own. And I've been using sw for years! I've only reordered features to satisfy the model. That really opens the door to more flexible opportunities. Thank you!

he blended the convex fillet into the convave fillet

he had a solid body and turned it into a solid body

"concave to congex blend"

I have no idea what you're talking about or why this was needed

why didn't you just mirror one fill to the other side

in alias/automotive design (which these dynamic looking features are based on) you would never use a straight line and a spline otherwise the shape looks negative. There are no straight lines anywhere, even lines that look straight are curves with a small amount of curvature, which gives the feature more flow and natural character which the eye picks up on

you used tangency and you think you've got a G2 connection?

this bloke talks too fast for his mouth

well hullooooo Andrew

thanks

Great, another quick way is just to offset the face(s) created from spline

Why dont use start to draw from beginning. Look confused wjen u explained

Thank you for this great tutorial. No thanks to solidborks for requiring a second step to just get a pattern to follow a sketch :(

Just wanted to let you guys know I loved these series! Hope you come back and do more Solidworks trainings on UA-cam!

Good video with most of the interesting not used so often settings included. Could actually be a little longer with even more little details and in a newer revision. Well done Sir. Ok, now I saw that there where indeed a complete series about the tool. I bow and sit down with a cup of coffee and enjoy these.

You just cleared so many gray areas in my understanding of surface fill and boundaries . More of such videos pls

The explanation is clear, and technique is brilliant, thank you.

thank you!

good stuff

Thought you would make the long parting lines tangent to the bottom fillet, so that fillet changes smoothly.

That's great explanations, Andrew. In the course of encountering those pattern obstacles I have found the same issues with drafts and other feature creation. So I have used this patterned body method as well. Great tutorial as always. Thanks!

That is an exellent method for adding those snap features on that round part, Andrew. Thanks for your video! 26 years using SolidWorks and still learning better ways to use the software. Have a great day!

One of the best solidworks channel

great and tricky

thank you so much, it helped a lot

Ok. So FIRST, I start a new part file. THEN, I insert part (multi-body part in this case) browse for the multi-body part. THEN, I use the delete/keep body function to KEEP the single part of that multi-body part I am working on. This establishes the child/parent relationship BTW, I had never learned the "save bodies" function. Always went the long way around! Now I have a better way to do this! Thanks for your video tutorials!

That technique for checking the draft angles for the shut offs will be very useful to me in future product designs. I also didn't know that 3-5 degrees was the industry standard. Your videos have been the best I have seen. Thanks for sharing. Have a great day!

Very helpful! Is there a way to make a G3 transition between arcs that bend in opposing directions? E.g. if the the center point of one of the arcs was flipped to the opposite side, forming an “S”? I tried to reproduce the same method, with no luck.

At 30seconds, into the introduction, a left hand Hardinge lathe 😊

I like the name “fantastic plastic” thumbs up to who came up with it!

Thanks for this presentation! Very useful and currently about to use this process.

holy shit this is dense.

What about the continuity curvature comb link between that curve and the previous one? Will it have a brake or perfect pass? Sometimes I find it hard to get even setting equal curvature between them.

Thank you! I was kind of giving up SolidWorks to learn Alias. haha

Problem is that you can't make that on a 3D spline with the same control.

Andrew Seven years on, these are still some of the best SW surfacing tutorials on UA-cam. Even though I'm currently building internal surfaces (which need smooth transitions to facilitate fluid flow), rather than external ID surfaces on consumer parts, the techniques in this series are invaluable. Thank you.